Material sample HZ "Anthracite"

£0.60 / Piece

1-3 days

plus shipping costs
/
Delivery in approx.
1-3 days
£15.00 / 25 Piece / Pack
(0.31 kg / Piece)

EAN: 4251469311473 | Item no.: 1147

The material sample is cut out of a regularly manufactured plate. It shows the original properties that can be expected from the product. However, it should be noted that it's a factory-fresh product and some properties are fully distinct after multiple days or weeks of use. This can be accelerated by washing it in the dishwasher.

Thanks to the material sample you can test the properties that are relevant for the planned use. Put it into the freezer box filled with water and check in the freezer if it's really frost-resistant. Hit it with a hammer and look and listen how stable, elastic and damping it is. Test the sample haptically and optically. However, please note that the typical distance during the observation is about 150 cm. Convince yourself how fast the potential new-smell vanishes.

Download datasheet in PDF format

Material sample von WARCO im Farbdesign Anthracite mit den Abmessungen ca. 100 x 100 x 40 mm. Produktfoto von Artikel 1147 in der Aufsicht von schräg vorne.

Selected colour

Anthracite (active)

Dimensions for shipping

100 x 100 x 40 mm

The selected dimension outlined in blue is used for demand calculation (unless otherwise specified in the product data).

Compare

Discount

Calculate quantity, price and discount

0 Pack

0 Piece

Download datasheet in PDF format

Product Highlights

Selected colour Anthracite

The colour "Anthracite" corresponds to the typical shade of the black rubber particles found in ELT (End of Life Tyres) granulate, which is produced during the recycling of used tyres and forms the basis of this product. Over time, this colour can change from a deep black to a slightly lighter anthracite. Anthracite is particularly suitable for outdoor areas such as walkways, stables or sports facilities and is the most commonly chosen colour in the fitness industry. Anthracite blends harmoniously into a variety of environments and offers a modern, understated design that is resistant to dirt and wear.

Material – Components and Structure

The product consists of black rubber granules and a polyurethane binder. The rubber granules used come from the recycling of used tyres, which is why they are called ELT (End of Life Tyres) granules. This origin gives the granulate its typical black or anthracite colour. Chemically, ELT is a blend of natural rubber (NR) and styrene butadiene rubber (SBR). A colourless binder is used for the anthracite products, while a coloured binder is used for the coloured variants, giving the black granules a coloured coating.

Installation – Processing – Assembly

Concealed interlocking puzzle joint with rounded bevel

The edge sections of the tile are designed with a stepped rabbet and an integrated interlocking puzzle joint. Two sides of the tile feature a positive interlock, while the other two sides have a precisely matching negative interlock. During installation, the puzzle joint creates a permanent connection between adjacent tiles. Due to its concealed placement within the stepped rabbet, the connection system remains invisible on the installed surface. This results in a classic, right-angled joint pattern, similar to a chessboard.

Structure of the underside

Drainage channels and domes in a square pattern

The underside of the tile has a structure of approximately 4mm deep drainage channels. The drainage channels of adjacent tiles are interconnected to form a continuous network. Within the square areas between the channels there is a large dome-shaped indentation approximately 15mm deep. These indentations enhance the tile's weather resistance, dimensional stability and shock-absorbing properties. The tiles can be laid over a bonded sub-base, waterproofing system or suitable gravel grids. Please refer to the installation guidelines for proper application.