How is ALLESDICHT applied?

ALLESDICHT is ready to use and only needs thorough stirring before application. Depending on the area, it can be applied by brush, roller, trowel or airless spray. It adheres to almost all common building substrates, including concrete, wood, bitumen, tiles and metal. The substrate must be sound, clean, dry and free from dust, oil and grease, while strongly absorbent surfaces should first be primed.

Apply ALLESDICHT in two or three coats, allowing each coat to dry before the next is applied. Each wet coat must not exceed 1.5 mm, producing a cured rubber skin at least 2 to 3 mm thick. Reinforcement fabric should be embedded at joints and penetrations. Once fully cured, ALLESDICHT forms an elastic, watertight rubber skin with more than 200% elongation that follows normal movement of the substrate.