Liquid-applied waterproofing for concrete?

ALLESDICHT liquid-applied waterproofing is applied to a sound, clean and dry substrate in two to three coats. The substrate must be free from dust, oil and grease; highly absorbent areas require a primer beforehand. ALLESDICHT adheres to almost all common construction substrates, including concrete, wood, bitumen, tiles and metal. ALLESDICHT is ready to use and must be stirred thoroughly before application.

The liquid rubber can be painted on, brushed, trowel-applied or sprayed using airless equipment. Apply each subsequent coat only after the preceding coat has fully dried. Each wet coat must be no more than 0.15 cm thick, while the finished rubber membrane must have a minimum thickness of 0.2 to 0.3 cm. At joints and penetrations, incorporate additional fabric reinforcement. Once dry, it forms an elastic, waterproof rubber membrane with more than 200% elongation and follows movement in the substrate. Before application, ALLESDICHT requires only thorough stirring; painting, brushing, trowel application and airless spraying can be used depending on the area.