Step protection mat horsebox FS "Anthracite"

£28.20

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
£28.20 / 1 piece / m²
(19.50 kg / piece)

EAN: 4251469307506 | Item no.: 0750

The large-sized step protection mat prevents injuries, damage, splinters and noise if a horse kicks out with a hoof in a horsebox or playpen and hits the wall. The hoof dents for short the elastic step protection mat, the kinetic energy is joint-friendly dissipated and the dented area returns to the initial state.

The above-mentioned effect is caused by PU bound rubber granulate and the progressively damming mat profile. The step protection mats horsebox are durable, robust and carefree: pressure washing is sufficient.

The Step protection mat is pasted on the protected wall or on a base plate (plywood, galvanised sheet metal, etc.). The base plate can be removably mounted on the wall by means of hidden hooks. It is not possible to screw on the Step protection mat horsebox.

The product data sheet to print

Step protection mat horsebox von WARCO im Farbdesign Anthracite mit den Abmessungen 1000 x 1000 x 30 mm. Produktfoto von Artikel 0750 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 0750, Step protection mat horsebox, Format 1000 x 1000 x 30 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 0750 - Step protection mat horsebox im Farbdesign Anthracite. Abmessungen 1000 x 1000 x 30 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 0750 - Step protection mat horsebox im Format 1000 x 1000 x 30 mm.

Typische Verlegung oder Einbausituation für den Artikel 0750 von WARCO - Step protection mat horsebox, Farbton Anthracite in der Abmessung 1000 x 1000 x 30 mm.

Anthracite (active)
Brick red + £1.90
Grass green + £4.00
Slate grey + £4.00
Chocolate brown + £4.00

Product type FS (4 connectors included - slightly rounded edges - strongly profiled underside)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Just paste it on

Paste on an appropriate base course with WARCO PU glue at some points or on entire surface.

Well and favourable invested money

Safe investment due to the original WARCO product with warranty - proved thousands of times.

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Avoid waterlogging and assure the water outlet.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

The bottom side of the tile is strongly structured on the entire surface. There are symmetrically arranged "frustums" with a height of about 15 mm looking from the bottom side of the wear layer. They are functional elements leading to the optimisation of the damping and drainage. The tiles can be laid on a bound (in particular cases also on unbound) base course or on a plastic honeycomb grid. Please take note of the laying instruction.