Play mat BZ "Anthracite"

£5.40

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
£21.60 / 4 piece / m²
(3.83 kg / piece)

EAN: 4251469301528 | Item no.: 0152

The elastic play mat can be easily laid on a hard, cold surface made of concrete, screed, tiles, washed concrete or stone in order to create a pleasantly warm, natural-looking, slip-resistant and aesthetic playing area. The economical play mat is weatherproof and frost-resistant - thus, it can be used not only in the buildings, but also in the open air areas.

The play mat has an anti-skid, open-pored surface and is quick-drying. It's suitable for mobile use, so that it can be removed and laid again. Besides, it's easy to keep clean. The relationship of resistance against mechanical loading and abrasion to damping, elasticity and open-pore nature is optimally adapted for the use of the tiles on normally loaded surfaces.

The product data sheet to print

Play mat von WARCO im Farbdesign Anthracite mit den Abmessungen 500 x 500 x 18 mm. Produktfoto von Artikel 0152 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 0152, Play mat, Format 500 x 500 x 18 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 0152 - Play mat im Farbdesign Anthracite. Abmessungen 500 x 500 x 18 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 0152 - Play mat im Format 500 x 500 x 18 mm.

Typische Verlegung oder Einbausituation für den Artikel 0152 von WARCO - Play mat, Farbton Anthracite in der Abmessung 500 x 500 x 18 mm.

Anthracite (active)
Brick red + £0.40
Chocolate brown + £0.40
Slate grey + £0.90
Grass green + £0.90

Package dimensions

540 x 18 x 540 mm

The packaging dimensions include the dimensions of the mounting system.

Product type BZ (square tile made of rubber granulate | all-round interlocking dovetail connection | slightly bevelled edges | underside with flat drainage profile)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and simply laid

Easy mounting without special expert knowledge on bound of fixed base courses.

Well and favourable invested money

Safe investment due to the original WARCO product with warranty - proved thousands of times.

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The edges of every tile are formed as a zip toothed strip (dovetail joint). Due to the interlocking of the plates during the laying and the form-fit connection arising this way, a permanently connected, positionally stable tile carpet. That's why the plates (normally) aren't connected with (pasted to) the base course. The connection of the rubber granulate tiles as a zip is particularly stable, durable and safe.

Structure of the underside

A network of 4 mm deep drainage channels across the elements is formed into the bottom side of the tiles - the one in contact with the base course. The tiles are mounted on an appropriate bound base course. Please take note of the laying instruction.