Fall protection tile (300 cm fall height) FS "Anthracite"

£17.70

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
£70.80 / 4 piece / m²
(11.30 kg / piece)

EAN: 4251469356245 | Item no.: 5624

With the proven fall protection tile, you take no risks on the playground, under playground equipment or in front of the climbing wall. Because the fall protection tile, which has been tested according to EN 1177 for a fall height of 300 cm, provides lasting and maintenance-free protection against injuries from falling.

Obviously, the fall protection tile is extensively water-permeable, weatherproof, frost-resistant and slide-blocking. It can be used both indoors and outdoors. The handy tiles are laid in a half-offset pattern.

The product data sheet to print

Fall protection tile (300 cm fall height) von WARCO im Farbdesign Anthracite mit den Abmessungen 500 x 500 x 100 mm. Produktfoto von Artikel 5624 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 5624, Fall protection tile (300 cm fall height), Format 500 x 500 x 100 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 5624 - Fall protection tile (300 cm fall height) im Farbdesign Anthracite. Abmessungen 500 x 500 x 100 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 5624 - Fall protection tile (300 cm fall height) im Format 500 x 500 x 100 mm.

Typische Verlegung oder Einbausituation für den Artikel 5624 von WARCO - Fall protection tile (300 cm fall height), Farbton Anthracite in der Abmessung 500 x 500 x 100 mm.

Anthracite (active)
Brick red + £0.40
Slate grey + £1.10
Grass green + £1.10
Chocolate brown + £1.10

Format 500 x 500 x 100 mm

Product type FS (lateral connectors | edges with bevelling | pronounced drainage profile on the bottom)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

300 cm critical fall height (EN 1177:2018)

TÜV technical release certificate (2018) for 300 cm fall height. Safety for public and private playing areas.

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

Lateral Connecting Pins - Plastic Dowels

On two sides - between the individual rows of tiles - the tiles are connected with side connecting pins (plastic plugs). The installation must be staggered, i.e. the rows of tiles are staggered by half a tile and the edges of one tile are aligned with the centre of the tile below (T-joint). In this staggered pattern, each tile is connected to 2 tiles in the row above and 2 tiles in the row below by connecting pins. These pins prevent the tiles from moving sideways, but do not prevent them from drifting apart along the longitudinal axis of the plastic plugs. For this reason, the tiled surface must be enclosed by walls or recessed kerbs.

Structure of the underside

The underside of the slab features an inverted pyramid toe structure. These pyramid studs, approximately 75 mm high, are designed to enhance the weather resistance, dimensional stability and shock absorption properties of the slab, while facilitating efficient water drainage for outdoor use. The tiles can be installed on solid substrates (concrete, asphalt, interlocking paving, tiles, etc.), roofing membranes or plastic lawn grids. Installation guidelines must be followed.