Dog sleeping mat FS "Anthracite"

£6.90 / piece

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
£27.60 / 4 piece / m²
(3.85 kg / piece)

EAN: 4251469339651 | Item no.: 3965

The well-insulating and elastic dog sleeping mat is primarily used in the resting areas for dogs, i.e. in the dog breeding, in the species-appropriate kennel, in an animal shelter or at home - often also as a temporary solution. The dog sleeping mat is water-permeable, always slip-resistant and quick-drying. It protects the sensitive dogs' paws. Depending on the way of use, the dog sleeping mat can be laid with or without connectors. Thus, it's possible to take the mats away, e.g. in order to disinfect or deep clean them and the kennel. The resting surface covered by the dog sleeping mat contributes to the dog's better health.

The product data sheet to print

Dog sleeping mat von WARCO im Farbdesign Anthracite mit den Abmessungen 500 x 500 x 25 mm. Produktfoto von Artikel 3965 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 3965, Dog sleeping mat, Format 500 x 500 x 25 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 3965 - Dog sleeping mat im Farbdesign Anthracite. Abmessungen 500 x 500 x 25 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 3965 - Dog sleeping mat im Format 500 x 500 x 25 mm.

Typische Verlegung oder Einbausituation für den Artikel 3965 von WARCO - Dog sleeping mat, Farbton Anthracite in der Abmessung 500 x 500 x 25 mm.

Anthracite (active)
Brick Red + £0.60
Grass Green + £1.10
Slate Grey + £1.10

Product type FS (lateral connectors | Edges with bevelling | Pronounced drainage profile on the bottom)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

With UV stabilisation

The ELT rubber granulate contains UV stabilisers. The colour or colour coating does not yellow.

Toxicologically safe

No impermissible pollutant emissions, initial rubber odour dissipates over time.

Indoor & Outdoor

Weatherproof and frost-resistant. Suitable for indoor spaces and exposed outdoor areas.

Efl

Fire behaviour according to EN 13501-1: Efl Acceptable fire behaviour

Colour
Anthracite

The colour "Anthracite" corresponds to the typical shade of the black rubber particles found in ELT (End of Life Tyres) granulate, which is produced during the recycling of used tyres and forms the basis of this product. Over time, this colour can change from a deep black to a slightly lighter anthracite. Anthracite is particularly suitable for outdoor areas such as walkways, stables or sports facilities and is the most commonly chosen colour in the fitness industry. Anthracite blends harmoniously into a variety of environments and offers a modern, understated design that is resistant to dirt and wear.

Material

The product consists of black rubber granules and a polyurethane binder. The rubber granules used come from the recycling of used tyres, which is why they are called ELT (End of Life Tyres) granules. This origin gives the granulate its typical black or anthracite colour. Chemically, ELT is a blend of natural rubber (NR) and styrene butadiene rubber (SBR). A colourless binder is used for the anthracite products, while a coloured binder is used for the coloured variants, giving the black granules a coloured coating.

Assembly or connection system

On two sides - between each row of tiles - the tiles are connected by means of lateral connecting pins (plastic plugs). The tiles must be laid in a half-bond pattern, i.e. each row of tiles is offset by half a tile (T-joint). In this pattern, each tile is connected to two tiles in the row above and two tiles in the row below using plastic plugs. These plugs prevent lateral movement of the tiles, but do not restrict movement along the longitudinal axis of the plugs. For this reason, a perimeter edging must be installed around the tiled surface.

Structure of the underside

Structure of 15 mm high truncated pyramids

The underside of the tile features an embossed pattern of inverted truncated pyramids. These truncated pyramids, approximately 15 mm high, are specifically designed to enhance the tile's weather resistance, dimensional stability and shock-absorbing properties, while ensuring efficient water drainage in outdoor applications. The tiles can be installed on solid surfaces such as concrete, asphalt, interlocking paving or flagstones, as well as on roof waterproofing systems or plastic grass meshes. Please refer to the installation guidelines for correct application.

How is the ordered merchandise packaged and shipped?

Goods ready for despatch are packed to ensure cost effective and safe transport. Smaller orders are sent by parcel post - up to five parcels can be sent, with a maximum weight of 29kg per parcel.

Items are generally packed on disposable pallets. We use three types of pallet: quarter pallets, half pallets and industrial pallets. The items in your order are stacked on the appropriate pallet and wrapped in stretch film. Depending on the type of pallet, the goods ordered and the destination country, a pallet can weigh up to 1200kg. Please note that pallets will not be returned and will remain with the recipient.

Pallet shipments are handled by carriers. For shipments weighing up to 2500kg, unloading from the lorry is usually included in the price. For heavier shipments, the recipient is usually responsible for unloading (using a forklift, front-end loader or ramp). Alternative arrangements can be made if required.